C15.1 Retry Sequences

MediumImplementVerilator coverage build · serverReview the topic

Cover the orders of responses that a retry mechanism must handle, with chains, sets, a range and a default sequence.

Hardware context: A link that answers every transfer with OK, RETRY, ERR or TIMEOUT and retries failures. Cover the orders of responses that the retry logic must handle.

A link answers every transfer with OK, RETRY, ERR or TIMEOUT, and the covergroup samples once per transfer. Every response code is common. The retry logic only matters in some orders.

Write the covergroup resp_cov with the transition bins of the plan.

Signals in the Timeline

SignalWidthRole
samples8input of each check
Full specification
Given (preamble) and what you write
typedef enum bit [1:0] {OK, RETRY, ERR, TIMEOUT} resp_e;   // given

covergroup resp_cov with function sample(resp_e r);   // you write
BinPlan
recoverRETRY, then OK
two_triesRETRY, RETRY, then OK
gave_upRETRY, then any failure code in the range ERR to TIMEOUT
fail_okERR or TIMEOUT, then OK
othersevery other transition, shown in reports but not counted

Each case samples a fresh instance with a list of responses and reads get_inst_coverage() times 100, rounded. The full check samples more lists than the examples show.

Examples

Example 1

One Retry
Input
responses: OK RETRY OK
Output
coverage_percent_x100 = 2500

RETRY then OK covers recover: 1 of 4 bins.

Example 2

Two Retries and a Recovery
Input
responses: RETRY RETRY OK ERR OK
Output
coverage_percent_x100 = 7500

The last of RETRY, RETRY, OK completes two_tries and recover together; ERR then OK covers fail_ok: 3 of 4.

Example 3

Retries That Failed
Input
responses: RETRY ERR RETRY ERR
Output
coverage_percent_x100 = 2500

RETRY then ERR covers gave_up. ERR then RETRY is in no counted bin: 1 of 4.

Constraints and Contract

  • Keep the covergroup name, the sample argument, the coverpoint cp and the bin names; each bin is one bin, not an array.
  • The coverage build rejects a range inside a transition (lesson C15): write the range as a list of values.

Hints

Hint 1

a => b means a at one sample and b at the next.

Hint 2

A step may list several values: (x => y, z).

Hint 3

Which kind of bin collects transitions without counting them?

What the grader checks: Your covergroup is sampled with 18 lists of responses. Its instance coverage is compared with the value IEEE 1800-2023 19.5.2 and 19.11.1 give. Three lists are shown.

18 checks on Verilator coverage build · server. Run the examples first, then check the full regression. Full checks use the server judge. Downloads contain public samples only. A passing result establishes the tested cases, not a proof for all possible inputs.

See all 1 steps and the final capstone

Report a problem with this page

Your code SystemVerilogSaved locally
Ln 1, Col 1Tab indents · Ctrl/⌘ + Enter runs samples
Not run yet

One Retry

Input
responses: OK RETRY OK
Expected output
coverage_percent_x100 = 2500

RETRY then OK covers `recover`: 1 of 4 bins.

Run samples executes all 3 public checks. Check all tests runs 18 checks on the server.

Verilator coverage build · server