Silicon Lab
Physical Design Problems
Build a design, hunt its bugs, or repair what fails. Every answer runs on a real simulator.
All Problems
Build starts from a specification: make it work, then make it small or fast. Bug Hunt asks for the checker or the test that catches broken designs. Repair hands you a failure: find the cause, then fix the design.
Branches follow problem ratings. Choose any available problem.
- Easy
- Medium
- Hard
- Expert
- Solved
- Started
- Your next challenges
- Sign in to open
Sign in to earn a rating and open every challenge.
Physical Design · L1
- L1.2.1 The Smaller Enable Register Optimize Easy Verilator
- L1.4.1 Finish Legal Cell Placement Implement Easy Verilator
- L1.6.1 The Clock That Reached No Register Fix Easy Verilator
- L1.6.2 Reject an Incomplete Timing Report Verify Medium Verilator
Physical Design · L3
- L3.1.1 A Floorplan After Snapping Implement Medium Verilator
- L3.3.1 Open a Route Past the Macros Fix Medium Verilator
- L3.4.1 A Connected Grid with Floating Wells Verify Medium Verilator
- L3.5.1 Spend Fewer Straps on the Grid Optimize Medium Verilator
Physical Design · L4
- L4.3.1 Recover Wirelength After Legalization Implement Easy Verilator
- L4.3.2 Approve the Placed Block Verify Medium Verilator
- L4.4.1 Repair the Slow Reset Tree Fix Medium Verilator
- L4.5.1 Close Placement Timing Within Area Optimize Medium Verilator
Physical Design · L5
- L5.1.1 Separate Local Skew from Clock Spread Implement Easy Verilator
- L5.2.1 Check the Clock-Tree Handoff Verify Medium Verilator
- L5.3.1 Put the External Clock at Its Real Edge Fix Medium Verilator
- L5.4.1 Schedule Three Capture Clocks Optimize Medium Verilator
Physical Design · L6
- L6.3.1 Give the Crossbar Pins Room Fix Medium Verilator
- L6.4.1 Require the Routed Checks Together Verify Medium Verilator
- L6.6.1 Compute a Clock-Pin Antenna Budget Implement Easy Verilator
- L6.6.2 Protect the Routes with Fewer Diodes Optimize Medium Verilator
Physical Design · L7
- L7.1.1 Make the Hold Repair Survive Four Corners Implement Medium Verilator
- L7.3.1 Check the Base Cells After an ECO Verify Medium Verilator
- L7.5.1 Reconnect the Selector Without New Base Cells Fix Medium Verilator
- L7.5.2 Improve Cold-Corner Timing Within Area Optimize Medium Verilator
Physical Design · L8
- L8.1.1 Keep the FIFO Crossings Visible Implement Medium Verilator
- L8.2.1 Diagnose Hold Before Adding Cells Fix Medium Verilator
- L8.3.1 Route the Fixed-Die Register File Within Area Optimize Medium Verilator
- L8.4.1 Reject an Overstated Datasheet Verify Medium Verilator
Static Timing Analysis · T1
- T1.1.1 First Run: Find the Slack Debug Easy Verilator
- T1.5.1 Elmore by Hand, Checked by the Tool Implement Medium Verilator
Static Timing Analysis · T2
- T2.1.1 The Smallest Hold Repair Optimize Medium Verilator
- T2.3.1 Find the Second Failing Path Debug Medium Verilator
Static Timing Analysis · T3
- T3.1.1 Constrain the Reset Release Implement Medium Verilator
- T3.2.1 The Half-Cycle Budget Implement Medium Verilator
Static Timing Analysis · T4
- T4.2.1 Declare the Divided Clock Implement Medium Verilator
- T4.3.1 Budget Both Sides of the Block Implement Medium Verilator
Static Timing Analysis · T5
- T5.1.1 Restore the Same-Edge Hold Check Fix Medium Verilator
Static Timing Analysis · T6
- T6.1.1 A Checker for Timing and Electrical Limits Verify Medium Verilator
No problems match these filters.