Silicon Lab
Analog & Mixed-Signal Problems
Build a design, hunt its bugs, or repair what fails. Every answer runs on a real simulator.
All Problems
Build starts from a specification: make it work, then make it small or fast. Bug Hunt asks for the checker or the test that catches broken designs. Repair hands you a failure: find the cause, then fix the design.
Branches follow problem ratings. Choose any available problem.
- Easy
- Medium
- Hard
- Expert
- Solved
- Started
- Your next challenges
- Sign in to open
Sign in to earn a rating and open every challenge.
Analog · E1 Circuits and SPICE
- E1.2.1 A Diode Drop to Order Implement Medium Verilator
- E1.3.1 A Bench for the RC Delay Cell Verify Medium Verilator
- E1.4.1 The Least Capacitance Optimize Hard Verilator
- E1.5.1 A Corner to Order Implement Easy Verilator
- E1.6.1 The Bias That Came from Nowhere Fix Medium Verilator
Analog · E2 The MOS Transistor
- E2.1.1 A Switching Point at Mid-Rail Implement Easy Verilator
- E2.2.1 Two Thresholds, One Device Verify Medium Verilator
- E2.3.1 How Far from the Square Law Fix Medium Verilator
- E2.4.1 The Tail Current That Followed Its Drain Fix Medium Verilator
- E2.5.1 Size It from the Chart Implement Medium Verilator
- E2.6.1 A Bench for the Sleep Switch Verify Medium Verilator
- E2.7.1 The Same Current at Every Corner Optimize Hard Verilator
Analog · E3 Single-Transistor Amplifiers
- E3.1.1 Rebuild the Stage by Hand Implement Medium Verilator
- E3.2.1 The Gain That Fell When RD Rose Fix Easy Verilator
- E3.3.1 A Gain of 120 into 2 pF Implement Hard Verilator
- E3.4.1 The Gain That Ignores the Corner Implement Medium Verilator
- E3.5.1 A Bench for the Source Follower Verify Medium Verilator
- E3.6.1 A Current Buffer for a Photodiode Implement Medium Verilator
- E3.7.1 The Smallest Cascode Sink Optimize Hard Verilator
Analog · E4 Current Mirrors and Bias
- E4.1.1 The Mirror That Overshoots Fix Easy Verilator
- E4.2.1 One Reference, Two Currents Implement Medium Verilator
- E4.3.1 The Leanest Wide-Swing Sink Optimize Hard Verilator
- E4.4.1 A Reference That Shrugs at the Supply Implement Hard Verilator
- E4.6.1 Flat Within Two Millivolts Implement Hard Verilator
- E4.7.1 Catch the Bad Bias Block Verify Medium Verilator
Analog · E5 Differential Pairs and Op-Amps
- E5.1.1 Steer the Current Implement Easy Verilator
- E5.2.1 The Input Range the Buffer Hid Fix Medium Verilator
- E5.3.1 A Bench for the Five-Transistor OTA Verify Medium Verilator
- E5.5.1 The Offset That Came with a Faster Edge Fix Medium Verilator
- E5.6.1 The Smallest Buffer Optimize Hard Verilator
- E5.7.1 An OTA for a New Brief Implement Hard Verilator
Analog · E6 Frequency Response and Stability
- E6.1.1 Place the Pole Implement Easy Verilator
- E6.2.1 Predict the Closed Loop Implement Medium Verilator
- E6.4.1 The Buffer That a Bigger C_c Slowed Fix Medium Verilator
- E6.5.1 A Phase-Margin Bench for a Gain of Two Verify Hard Verilator
- E6.6.1 Stable from 1 to 5 pF on Less Current Optimize Hard Verilator
Analog · E7 Noise, Mismatch and Variation
- E7.1.1 Find the Flicker Corner Verify Medium Verilator
- E7.2.1 A Hold Capacitor for 12 Bits Implement Easy Verilator
- E7.3.1 Quieter on the Same Current Optimize Hard Verilator
- E7.4.1 A Mirror Matched to One Percent Implement Medium Verilator
- E7.5.1 Offset by the Square Micrometre Optimize Hard Verilator
- E7.6.1 Nine Settings, One Verdict Verify Medium Verilator
- E7.7.1 The Offset Every Die Agreed On Fix Hard Verilator
Analog · E8 Capstones and the Mixed-Signal Edge
- E8.1.1 A Faster Decision Implement Medium Verilator
- E8.2.1 The Pedestal That Came with a Wider Switch Fix Medium Verilator
- E8.3.1 Linear on the Least Switch Area Optimize Hard Verilator
- E8.4.1 Break the DAC Buffer Verify Hard Verilator
Analog · E9 Devices and Single Stages, Completed
- E9.1.1 Which Parameter Bent the Curve Verify Medium Verilator
- E9.2.1 Keep the Leak Under a Budget Implement Medium Verilator
- E9.3.1 A Divider That Holds over Temperature Implement Easy Verilator
- E9.3.2 The Capacitor That Changed with Bias Debug Easy Verilator
- E9.4.1 Gain of Three, Exactly Implement Easy Verilator
- E9.5.1 Fold It for a Low Input Implement Hard Verilator
- E9.6.1 The Follower That Rang Debug Medium Verilator
- E9.7.1 Find the Slow Tail Verify Hard Verilator
- E9.8.1 Bias That Follows the Process Implement Medium Verilator
Analog · E10 Feedback in Depth
- E10.1.1 Name the Loop Fix Easy Verilator
- E10.2.1 Gain of Ten with the Loading Counted Implement Medium Verilator
- E10.3.1 A Flat TIA for 1 pF Implement Hard Verilator
- E10.4.1 A Current Source You Can Program Implement Medium Verilator
- E10.5.1 Output Impedance Without a Test Source Verify Hard Verilator
- E10.6.1 Buy 16.7 dB of Linearity Implement Medium Verilator
- E10.7.1 The Loop That Fails When Gain Drops Verify Hard Verilator
No problems match these filters.