T4.3.1 Budget Both Sides of the Block

MediumImplement25 minOpenROAD · serverReview the topic

Translate the external timing note without using the budgets as optimization knobs.

Hardware context: Block interface with externally timed data inputs and outputs. Preserve the supplied external budgets while checking both timing directions.

The two-register block uses a 2 ns clock. Its external source delivers data between 0.15 ns and 1.2 ns after the reference edge; the receiver reserves 0.4 ns for setup and 0.2 ns for hold.

Write the five interface values in JSON. Use the SDC sign convention for minimum output delay and the stated 0.01 pF load. The requirements include matching the supplied interface, even if a different budget produces better slack.

Requirements

RequirementLimitUnit
External budgets differing from the interface note= 0count
Maximum slack≥ 0.5ns
Minimum slack≥ 0.1ns
Unconstrained endpoints= 0count

Live analysis: TT ideal-wire OpenSTA on the four-cell reference block. The clock, topology and input transition stay fixed; the interface note supplies the constraints.

Full specification
JSON fieldAllowed valuesMeaning
input0 to 2Latest arrival after the reference edge, in ns.
input_min0 to 0.5Earliest arrival after the edge, in ns.
output0 to 1External setup reservation, in ns.
output_min-0.5 to 0.5Negative external hold reservation, in ns.
load0.001 to 0.1External capacitance in pF.

TT ideal-wire OpenSTA on the four-cell reference block. The clock, topology and input transition stay fixed; the interface note supplies the constraints.

Numeric checks use inclusive bounds. A missing measurement always fails. Only the documented fields are accepted.

Examples

Example 1

Correct External Environment
Input
The supplied interface note
Output
External budgets differing from the interface note: 0
Maximum slack: 0.6544 ns
Minimum slack: 0.1407 ns
Unconstrained endpoints: 0

Timing and the external assumptions both belong in the review.

Example 2

Zero Maximum Input Delay
Input
Replace the supplied maximum input arrival with zero
Output
External budgets differing from the interface note: 1
Maximum slack: 1.2323 ns
Minimum slack: 0.1407 ns
Unconstrained endpoints: 0

The improved slack does not justify changing an external guarantee.

Example 3

Wrong Hold Sign
Input
Use +0.2 ns as the minimum output delay
Output
External budgets differing from the interface note: 1
Maximum slack: 0.6544 ns
Minimum slack: 0.1854 ns
Unconstrained endpoints: 0

A positive result does not excuse a constraint that describes the wrong interface.

Submission Rules

  • Submit one JSON object with every documented configuration field. The supplied circuit and external environment stay fixed.
  • Run measures your configuration. Submit applies the same requirements and records the result.
  • The stated stage and cell corner define this exercise; passing does not establish full chip sign-off.

Hints

Hint 1

Keep minimum and maximum external arrivals separate.

Hint 2

The minimum output delay is the negative of the external hold reservation in this exercise.

Hint 3

Inspect the interface-mismatch row before accepting a timing improvement.

What is checked: TT ideal-wire OpenSTA on the four-cell reference block. The clock, topology and input transition stay fixed; the interface note supplies the constraints.

Run and Submit use the same measured requirements. Run is a preview; Submit records an attempt. The fixed circuit and allowed settings use the pinned OpenROAD/OpenSTA engine.

More problems on this topic

Report a problem with this page

Your configuration JSONSaved locally
Ln 1, Col 1Ctrl/⌘ + Enter runs
Not run yet

Run your configuration to inspect the result.

OpenROAD · server