An idle block still burns power. Name the one cell of its power report that holds it, and read the value.
Hardware context: Eight-bit multiply-accumulate datapath, idle. Locate the clock-pin power of idle registers in a power report.
A multiply-accumulate block of 447 cells waits with its enable at 0. Its data inputs still toggle, and its 10 ns clock still runs. The power report says 214.3 µW in total.
A colleague wants to add a clock gate and asks how much power it could remove at most. The answer is in one cell of the report. Name its row (the group) and its column, and give the value of that cell in microwatts.
The report prints watts. The full table is in the specification below.
Requirements
| Requirement | Limit | Unit |
|---|---|---|
| Share of the idle power in the cell you named | ≥ 0.95 | count |
| Error of your reading of that cell | ≤ 1 | µW |
Recorded experiments: Recorded build-time OpenSTA 3.1.0 report_power on sky130_fd_sc_hd at tt, 25 °C, 1.8 V, with a 10 ns clock and the stated activity. These are vectorless estimates before clock tree synthesis. No tool runs during grading. Circuit: the bundled mac8 netlist with `en` held at 0 and every data input toggling 0.2 times per cycle.
Full specification
| Group | Internal (W) | Switching (W) | Leakage (W) | Total (W) |
|---|---|---|---|---|
| Sequential | 2.142e-1 | 0.000e+0 | 7.269e-7 | 2.142e-1 |
| Combinational | 1.179e-4 | 0.000e+0 | 1.080e-6 | 1.190e-4 |
| Clock | 0.000e+0 | 0.000e+0 | 0.000e+0 | 0.000e+0 |
| Total | 2.143e-1 | 0.000e+0 | 1.807e-6 | 2.143e-1 |
Recorded build-time OpenSTA 3.1.0 report_power on sky130_fd_sc_hd at tt, 25 °C, 1.8 V, with a 10 ns clock and the stated activity. These are vectorless estimates before clock tree synthesis. No tool runs during grading. Circuit: the bundled mac8 netlist with en held at 0 and every data input toggling 0.2 times per cycle.
The share check divides the cell you named by the total. The value check compares your number with that cell, within 1 µW.
Examples
Example 1
Blame the Flop Outputs- Input
{ "group": "sequential", "column": "switching", "power_uw": 214 }- Output
Share of the idle power in the cell you named: 0 Error of your reading of that cell: 214 µW
The cell must hold the idle power, and the value must be read in µW.
Example 2
Look in the Clock Row- Input
{ "group": "clock", "column": "internal", "power_uw": 214 }- Output
Share of the idle power in the cell you named: 0 Error of your reading of that cell: 214 µW
The cell must hold the idle power, and the value must be read in µW.
Example 3
Misread the Unit- Input
{ "group": "sequential", "column": "internal", "power_uw": 0.214 }- Output
Share of the idle power in the cell you named: 0.9994 Error of your reading of that cell: 213.9485 µW
The cell must hold the idle power, and the value must be read in µW.
Submission Rules
- Submit one JSON object with every documented field.
- Run checks your submission against the recorded measurements. Submit applies the same requirements and records the result.
- The numbers are estimates for one library corner and one activity. Passing does not sign off the power of a chip.
Hints
Hint 1
With the enable at 0 no register changes. Ask which pin of a flop still toggles.
Hint 2
The Clock row lists clock buffers and clock gates. This netlist has none.
Hint 3
1e-04 W is 100 µW.
What is checked: Recorded build-time OpenSTA 3.1.0 report_power on sky130_fd_sc_hd at tt, 25 °C, 1.8 V, with a 10 ns clock and the stated activity. These are vectorless estimates before clock tree synthesis. No tool runs during grading. Circuit: the bundled mac8 netlist with en held at 0 and every data input toggling 0.2 times per cycle.
Run and Submit use the same measured requirements. Run is a preview; Submit records an attempt. No physical tool runs during this exercise; the records come from the pinned build-time experiments.
More problems on this topic