W2.2.1 Quiet the Multiplier

MediumOptimize20 minOpenROAD · recorded experimentsReview the topic

A multiplier works in every cycle and is used in one of ten. Choose where the isolation gates go, and keep timing and area.

Hardware context: Eight-bit multiplier whose product is used in one cycle of ten. Place isolation gates where they stop the toggling, within timing and area.

A block multiplies two 8-bit operands. New operands arrive in every cycle. The product is stored only when sel is 1, in about 10 % of the cycles. In the other cycles the block stores a different value.

Without isolation the block burns 540.2167 µW. Cut it to 130 µW or less. The longest path must keep at least 0.25 ns of setup slack at a 4 ns clock. The cell area must stay within 2460 µm².

Choose where AND gates controlled by sel go. The choices are both operands, operand a only, operand b only, the product after the multiplier, or nowhere. Five netlists of the same function were synthesized and measured. Measure, do not assume: synthesis can turn two mirror-image changes into netlists with different slack and area.

Requirements

RequirementLimitUnit
Power when the product is used in 10 % of the cycles≤ 130µW
Setup slack at a 4 ns clock≥ 0.25ns

Budget: Cell area ≤ 2460 µm². Smaller is better after every requirement passes.

Recorded experiments: Recorded build-time OpenSTA 3.1.0 report_power on sky130_fd_sc_hd at tt, 25 °C, 1.8 V, with a 10 ns clock and the stated activity. These are vectorless estimates before clock tree synthesis. No tool runs during grading. Circuit: tools/probes/lowpower/opiso.v synthesized onto sky130_fd_sc_hd in five variants. Power: operands toggle 0.2 times per cycle, sel has a duty of 0.1. Slack: a 4 ns clock with every input arriving at the clock edge, ideal wires.

Full specification
JSON fieldAllowed valuesMeaning
isolate"none", "both", "a_only", "b_only", "product"none, both operands, operand a only, operand b only, or the product after the multiplier.

Recorded build-time OpenSTA 3.1.0 report_power on sky130_fd_sc_hd at tt, 25 °C, 1.8 V, with a 10 ns clock and the stated activity. These are vectorless estimates before clock tree synthesis. No tool runs during grading. Circuit: tools/probes/lowpower/opiso.v synthesized onto sky130_fd_sc_hd in five variants. Power: operands toggle 0.2 times per cycle, sel has a duty of 0.1. Slack: a 4 ns clock with every input arriving at the clock edge, ideal wires.

Numeric checks use inclusive bounds. Only the documented fields are accepted.

Examples

Example 1

No Isolation
Input
{
  "isolate": "none"
}
Output
Power when the product is used in 10 % of the cycles: 540.2167 µW
Setup slack at a 4 ns clock: 0.5116 ns
Cell area: 2333.488 µm²

Power, slack and area are all read from the recorded run of that netlist.

Example 2

Gates After the Multiplier
Input
{
  "isolate": "product"
}
Output
Power when the product is used in 10 % of the cycles: 551.4274 µW
Setup slack at a 4 ns clock: 0.3399 ns
Cell area: 2371.024 µm²

Power, slack and area are all read from the recorded run of that netlist.

Example 3

Operand a Only
Input
{
  "isolate": "a_only"
}
Output
Power when the product is used in 10 % of the cycles: 118.1575 µW
Setup slack at a 4 ns clock: 0.2528 ns
Cell area: 2452.352 µm²

Power, slack and area are all read from the recorded run of that netlist.

Submission Rules

  • Submit one JSON object with every documented field.
  • Run checks your submission against the recorded measurements. Submit applies the same requirements and records the result.
  • The numbers are estimates for one library corner and one activity. Passing does not sign off the power of a chip.

Hints

Hint 1

Power is spent where nets toggle. Find where the toggling starts.

Hint 2

A gate behind the multiplier cannot stop the multiplier.

Hint 3

Synthesis results differ between variants. Read the slack and the area of your choice before you submit.

What is checked: Recorded build-time OpenSTA 3.1.0 report_power on sky130_fd_sc_hd at tt, 25 °C, 1.8 V, with a 10 ns clock and the stated activity. These are vectorless estimates before clock tree synthesis. No tool runs during grading. Circuit: tools/probes/lowpower/opiso.v synthesized onto sky130_fd_sc_hd in five variants. Power: operands toggle 0.2 times per cycle, sel has a duty of 0.1. Slack: a 4 ns clock with every input arriving at the clock edge, ideal wires.

Run and Submit use the same measured requirements. Run is a preview; Submit records an attempt. No physical tool runs during this exercise; the records come from the pinned build-time experiments.

More problems on this topic

Report a problem with this page

Your configuration JSONSaved locally
Ln 1, Col 1Ctrl/⌘ + Enter runs
Not run yet

Run your configuration to inspect the result.

OpenROAD · recorded experiments