P11.11.1 Eight Timers, One Frame

MediumImplementIcarus Verilog · serverReview the topic

Read a PFC frame and hold exactly the priorities it names, each for its own time.

Hardware context: An Ethernet MAC and physical coding sublayer: frame builder and checker, reconciliation sublayer and block encoder. Build, check and pace Ethernet frames, and code them for the physical layer as IEEE 802.3 specifies.

A port with priority-based flow control keeps eight queues. One PFC frame can stop some of them and leave the rest alone.

Write pfc_rx. When the frame is a valid PFC frame, it sets the hold time of each priority the frame enables and returns 1. Any other frame changes nothing and returns 0.

pfc_blocked is given. It says whether priority p is held at time t.

Time is counted in octet times. One pause quantum, 512 bit times, is 64 octet times.

Signals in the Timeline

SignalWidthRole
test_number8input of each check
Full specification
Signatures (keep them)
int hold_end [0:7];
function automatic void pfc_reset();
function automatic bit pfc_rx(input [511:0] frame, input int n, input int t);   // frame[8*k +: 8] = octet k
function automatic bit pfc_blocked(input int p, input int t);                   // given
OctetsPFC frame
0 to 5destination 01-80-C2-00-00-01
6 to 11source address
12, 1388-08
14, 15opcode 01-01
16, 17priority_enable_vector, high octet first
18 to 33time[0] to time[7], two octets each, high octet first
34 to 59zeros
60 to 63FCS
RuleValue
Valid PFC frameexactly 64 octets, that destination, 88-08 and 01-01. Anything else is ignored
Longer control framesthis port discards them (a bench choice); 31.5.1 also allows truncating such a frame and acting on it
e[p]bit p of octet 17. Octet 16 is reserved: ignore it
e[p] = 1priority p is held from time t until t + 64 × time[p]. 0 releases it
e[p] = 0priority p keeps whatever hold it had

Examples

Example 1

Priorities 3 and 5
Input
vector 00-28 at t = 1000
Output
held_priorities = 'b00101000, acted = yes

e[3] and e[5] are set. At t = 2000 priority 3 (held until 13,800) and priority 5 (until 4,200) are held.

Example 2

Later
Input
the same frame, t = 5000
Output
held_priorities = 'b00001000, acted = yes

Priority 5's 50 quanta are over; priority 3 is still held.

Example 3

A PAUSE Frame
Input
opcode 00-01
Output
held_priorities = 'b00000000, acted = no

Same address and type, but not the PFC opcode: nothing changes.

Constraints and Contract

  • Keep the function names, the arguments and hold_end.
  • The FCS was already checked; do not check it again.
  • t never decreases from one call to the next.
  • Off limits: the names lib, model, rng, tb, root and the modules of the bench.

Hints

Hint 1

Which octet holds e[0], and which bit of it?

Hint 2

A frame with the PAUSE opcode also has Length/Type 88-08. Is it a PFC frame?

Hint 3

What should a priority whose e bit is 0 keep?

What the grader checks: The fixture checks seven literal frames against an independent JavaScript model. It checks 100 random frames against the bench PFC client, every priority at 71 later times. Queue behaviour beyond the hold is IEEE 802.1Q's and is not tested.

9 checks on Icarus Verilog · server. Run the examples first, then check the full regression. Full checks use the server judge. Downloads contain your source only; samples require the simulation service. A passing result establishes the tested cases, not a proof for all possible inputs.

See all 1 steps and the final capstone

Report a problem with this page

Your code SystemVerilogSaved locally
Ln 1, Col 1Tab indents · Ctrl/⌘ + Enter runs samples
Not run yet

Priorities 3 and 5

Input
vector 00-28 at t = 1000
Expected output
held_priorities = 'b00101000, acted = yes

e[3] and e[5] are set. At t = 2000 priority 3 (held until 13,800) and priority 5 (until 4,200) are held.

Run samples executes all 3 public checks. Check all tests runs 9 checks on the server.

Icarus Verilog · server