T2.1.1 The Smallest Hold Repair

MediumOptimize25 minOpenROAD · serverReview the topic

Repair a short path with the least allowed noninverting delay-cell area.

Hardware context: Two-register shift path with delayed capture clock. Repair minimum delay within a cell-area budget.

Five clock buffers delay the capture edge of a two-register shift path. Its minimum delay fails, while its maximum path has room for a small repair.

Choose one supplied noninverting cell or leave the path unchanged. Meet both timing floors with at most 4 µm² of added logical cell area. The clock tree, 1 ns period and register behavior remain fixed.

Requirements

RequirementLimitUnit
Maximum internal slack≥ 0.75ns
Minimum internal slack≥ 0.02ns

Budget: Added logical cell area ≤ 4 µm². Smaller is better after every requirement passes.

Live analysis: TT ideal-wire OpenSTA with the authored clock buffer chain propagated. Only the internal register-to-register path is assessed; external I/O timing and other corners remain open.

Full specification
JSON fieldAllowed valuesMeaning
delay"none", "clkbuf_1", "dlygate4sd1_1", "dlygate4sd3_1"One noninverting data-path buffer, or no insertion.

TT ideal-wire OpenSTA with the authored clock buffer chain propagated. Only the internal register-to-register path is assessed; external I/O timing and other corners remain open.

Numeric checks use inclusive bounds. A missing measurement always fails. Only the documented fields are accepted.

Examples

Example 1

Unrepaired
Input
{
  "delay": "none"
}
Output
Maximum internal slack: 0.9734 ns
Minimum internal slack: -0.0399 ns

Delay can help minimum timing while consuming maximum-delay margin and area.

Example 2

Large Delay Cell
Input
{
  "delay": "dlygate4sd3_1"
}
Output
Maximum internal slack: 0.4336 ns
Minimum internal slack: 0.4835 ns

Delay can help minimum timing while consuming maximum-delay margin and area.

Example 3

Smaller Delay Cell
Input
{
  "delay": "dlygate4sd1_1"
}
Output
Maximum internal slack: 0.7623 ns
Minimum internal slack: 0.1364 ns

Delay can help minimum timing while consuming maximum-delay margin and area.

Submission Rules

  • Submit one JSON object with every documented configuration field. The supplied circuit and external environment stay fixed.
  • Run measures your configuration. Submit applies the same requirements and records the result.
  • The stated stage and cell corner define this exercise; passing does not establish full chip sign-off.

Hints

Hint 1

A buffer used on the clock network can also be a noninverting delay element in this bounded experiment.

Hint 2

Compare the hold margin with the remaining setup margin.

Hint 3

A candidate that passes timing must still meet the added-area budget.

What is checked: TT ideal-wire OpenSTA with the authored clock buffer chain propagated. Only the internal register-to-register path is assessed; external I/O timing and other corners remain open.

Run and Submit use the same measured requirements. Run is a preview; Submit records an attempt. The fixed circuit and allowed settings use the pinned OpenROAD/OpenSTA engine.

More problems on this topic

Report a problem with this page

Your configuration JSONSaved locally
Ln 1, Col 1Ctrl/⌘ + Enter runs
Not run yet

Run your configuration to inspect the result.

OpenROAD · server