RTL Reference

unique case and priority case

These keywords state what you promise about a case. The simulator checks the promise and synthesis relies on it.

Syntax

unique case (sel)     // exactly one item matches
  2'b01: y = a;
  2'b10: y = b;
endcase
priority case (1'b1)  // at least one matches; the first wins
  req[0]: g = 0;
  req[1]: g = 1;
endcase

Rules

  • unique: the items do not overlap, and one always matches. They may be tested in parallel.
  • unique0: the items do not overlap, but no match is allowed.
  • priority: at least one item matches, and the order matters.
  • A broken promise gives a violation report in simulation.
  • Synthesis trusts the promise. A value you did not list can then behave differently in hardware.
  • A default item covers the unlisted values and is the safer choice.

Example

module tb;
  logic [2:0] req;
  logic [1:0] grant;

  always_comb begin
    grant = 2'd3;
    priority case (1'b1)
      req[0]: grant = 2'd0;
      req[1]: grant = 2'd1;
      req[2]: grant = 2'd2;
      default: grant = 2'd3;
    endcase
  end

  initial begin
    req = 3'b100; #1 $display("req=%b grant=%0d", req, grant);
    req = 3'b110; #1 $display("req=%b grant=%0d", req, grant);
    req = 3'b111; #1 $display("req=%b grant=%0d", req, grant);
    req = 3'b000; #1 $display("req=%b grant=%0d", req, grant);
  end
endmodule
Output on Icarus Verilog 12
req=100 grant=2
req=110 grant=1
req=111 grant=0
req=000 grant=3

Run It in the Playground

Common Mistake

Using unique to silence a latch warning

always_comb
  unique case (sel)
    2'b00: y = a;
    2'b01: y = b;
  endcase   // sel = 2 or 3: y is not assigned

The keyword tells synthesis that 2 and 3 never happen. If they do, simulation and hardware disagree.

Fix: Assign a default before the case, or add a default item.

Learn It Properly

These lessons teach it step by step, with practice problems.

Standard

IEEE 1800-2023, 12.5.3.